Written with the use of AutoCAD in mind, however principles apply to other CAD packages.Core conceptsAll layer names are prefix with a predefined set of numbers is the core of the concept behind this system. The first digit represents the discipline and the following digits refer to the object type (doors, columns etc.).BenefitsMultiple drafters can work together on the same … [Read more...] about Numbered CAD Layering System
Metric Dimensioning Guide
Written by Allan Lines Projection lines indicate extremities of a dimension. A gap of 1mm is generally drawn from the object to the start of the projection line. An extension of 2mm is generally drawn past the dimension line.Dimension lines run between the projection lines. They generally terminate with and arrowhead or tick. Arrowheads are usually 3x1mm and ticks, 2mm … [Read more...] about Metric Dimensioning Guide
Measures of Angle
What's it all About?Everyone who has had any sort of formal education at all will have learned about angles. How to measure them and how to draw them. They will certainly know about degrees. Most, but not all, will have gone on to do trigonometry with right-angled triangles, and words like sine cosine tangent will have some (half-remembered?) meaning for them. … [Read more...] about Measures of Angle
ISO Metric Die and Tap
Tap sizeDiameter (in)Diameter (mm)Thread count (TPI)Thread pitch (mm)Tap drill size#0000-1600.02100.53341600.1591/64 in#000-1200.03400.86361200.212#71M1x0.20.03941.0000~1270.2000.8 mmM1x0.250.03941.0000~1020.2500.75 mmM1.1x0.250.04331.1000~1020.2500.85 mmM1.1x0.20.04331.1000~1270.2000.9 mm#00-900.04701.1938900.282#65M1.2x0.20.04721.2000~1270.2001 … [Read more...] about ISO Metric Die and Tap
ISO 13567 – CAD layer standard
ISO 13567 is an international Computer-aided design (CAD) layer standard.Standard partsThe standard is divided in three parts:ISO 13567-1:1998Technical product documentation -- Organization and naming of layers for CAD -- Part 1: Overview and principlesISO 13567-2:1998Technical product documentation -- Organization and naming of layers for CAD -- Part 2: Concepts, format … [Read more...] about ISO 13567 – CAD layer standard
How to fold an A1 size drawing
Why fold it this way? The resultant fold is a handy A4 sheet size.The folded drawing opens and closes easier that other types of folding.The drawing title is on the front. Thus you do not have to open the entire thing to see what the drawing is! … [Read more...] about How to fold an A1 size drawing